|
.
|
Even seemingly un-repairable wheels can be fixed to look and operate as new! This includes wheels bent either on the front or back
(of the wheel) due to some sort of impact, wheels with pieces broken out of them, Egg or Oval shaped wheels, or centre bent wheels that
require machining where they bolt to the car.
Any wheels that will require repair work are first assessed of all damage and a firm quote will be prepared for customer approval. The
customer will then be contacted with said quote unless otherwise previously arranged.
BROKEN WHEELS
Wheels with chunks missing or wheels that break during straightening will require welding. This is performed by our experienced welder
using the latest TIG equipment. The piece(s) are welded and then machined off to re-true the wheel. We will then polish and refinish the
wheel as per our customers requirements.
Here is an example of a wheel with a missing piece
|
BENT WHEELS
Wheels which have been bent from impact to curbs, potholes, collision, etc. Can be straightened to well within "usable" tolerances using
our custom built wheel press. Oval or "egg" shaped wheels can also be pressed round again. Oval or elongated bolt holes (from wheel
running loose) can be welded and re-machined. Of course we can refinish your wheels as required after straightening work has been
performed if necessary.
Here's an example
|
|
